20x20 Aluminium T-Slot / V-Slot Extrusion – 20 x 20 mm, Black Anodised, NZ Made

20x20 Aluminium V Slot Extrusion

Black anodised

Our standard 20x20 v slot extrusion with a black anodised finish.

store.alexco.co.nz proudly make this extrusion in New Zealand.

Available in 1,200mm & 2,415mm lengths

Jig marks: This is manufactured as an industrial product. Some pieces will have jig marks from the anodising process up to 50 mm from each end, and these are more visible on black. Leaving these ends on rather than cutting them off as scrap minimises waste and keeps the cost down. The marks can usually be orientated to a non-visible position in your build. If your project needs an absolutely perfect surface, allow an extra 50 mm at each end when ordering and trim to length as required. We are unable to cut around jig marks at the factory.

Please select the correct shipping option:

- lengths up to 1600mm can be sent by standard courier

- lengths longer up to 2400mm can be sent by oversize courier

- longer 2400mm must be sent by Mainfreight.

For heavy freight, your selected delivery address will need to be accessible for a delivery truck, and you will need to have the ability to manage & lift the crate off the truck. Alternatively we can arrange for delivery by Hiab crane truck. There will be an additional fee for this service.

Custom cutting of our V slot aluminium:

We can now cut to your required lengths - add in the length and quantity you require cut.

Accuracy:

• For lengths between 100mm and 3000mm, we aim for a tolerance of +/- 0.5mm.
• For other lengths, we aim for a tolerance of +/- 1mm.
• All of each specified length will be cut exactly the same, with clean, square cuts.

(Note: For custom-cut lengths, the cart shows the cutting charge and material cost separately — the full total appears at checkout.)