{"title":"Specialty Profiles","description":"\u003cp\u003ePurpose-built profiles (glazing beads, joinery, handles, label holders, louvres and more) available as a mill run from existing Alexco dies. Made to order at our Wellington plant — typical runs 150–500 kg.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/mill-run-profiles\"\u003e← All Mill Run categories\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"3288-control-cap-side-545618","title":"Aluminium Control Cap Side Profile — Die 3288","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3288).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Flat\u003c\/li\u003e\n\u003cli\u003eWeight: 0.203 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 246 m (indicative $6.09 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1232 m (indicative $2.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"246 m ($6.09 per l\/m)","offer_id":43379714195523,"sku":"MR-3288-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"1232 m ($2.64 per l\/m)","offer_id":43379714228291,"sku":"MR-3288-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3288.png?v=1781231952"},{"product_id":"1644-spline-cross","title":"Aluminium Spline Cross Profile — Die 1644","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1644).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Round Tube\u003c\/li\u003e\n\u003cli\u003eWeight: 0.057 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 877 m (indicative $2.00 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 4386 m (indicative $0.91 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"877 m ($2.00 per l\/m)","offer_id":43379730874435,"sku":"MR-1644-50","price":1754.0,"currency_code":"NZD","in_stock":true},{"title":"4386 m ($0.91 per l\/m)","offer_id":43379730907203,"sku":"MR-1644-250","price":3991.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-1644.png?v=1781231953"},{"product_id":"1977-spline-shaft","title":"Aluminium Spline Shaft Profile — Die 1977","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1977).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Round Tube\u003c\/li\u003e\n\u003cli\u003eWeight: 0.057 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 23 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 877 m (indicative $1.71 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 4386 m (indicative $0.74 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"877 m ($1.71 per l\/m)","offer_id":43379731038275,"sku":"MR-1977-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"4386 m ($0.74 per l\/m)","offer_id":43379731071043,"sku":"MR-1977-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-1977.png?v=1781231954"},{"product_id":"89-1-4-double-top-glass-runner","title":"Aluminium Double-Top Glass Runner 6.25 mm (1\/4\") — Die 89","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 89).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.275 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 182 m (indicative $8.25 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 909 m (indicative $3.58 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"182 m ($8.25 per l\/m)","offer_id":43379734413379,"sku":"MR-89-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"909 m ($3.58 per l\/m)","offer_id":43379734446147,"sku":"MR-89-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-89.png?v=1781231951"},{"product_id":"118-1-1-4-screwed-carpet-edge","title":"Aluminium Screwed Carpet Edge 31.75 mm (1¼\") — Die 118","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 118).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.133 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 73 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 376 m (indicative $3.99 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1880 m (indicative $1.73 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"376 m ($3.99 per l\/m)","offer_id":43379734478915,"sku":"MR-118-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"1880 m ($1.73 per l\/m)","offer_id":43379734511683,"sku":"MR-118-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-118.png?v=1781231951"},{"product_id":"446-bath-mould","title":"Aluminium Bath Mould Profile — Die 446","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 446).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.119 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 420 m (indicative $3.57 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2101 m (indicative $1.55 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"420 m ($3.57 per l\/m)","offer_id":43379734609987,"sku":"MR-446-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"2101 m ($1.55 per l\/m)","offer_id":43379734642755,"sku":"MR-446-250","price":3257.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-446.png?v=1781231951"},{"product_id":"2168-brochure-rail-pwb2400","title":"Aluminium Brochure Rail Profile — Die 2168","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 2168).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.257 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 98 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 195 m (indicative $7.71 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 973 m (indicative $3.34 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"195 m ($7.71 per l\/m)","offer_id":43379734741059,"sku":"MR-2168-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"973 m ($3.34 per l\/m)","offer_id":43379734773827,"sku":"MR-2168-250","price":3250.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-2168.png?v=1781231953"},{"product_id":"2425-door-seal","title":"Aluminium Door Seal Profile — Die 2425","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 2425).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.102 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 59 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 490 m (indicative $3.06 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2451 m (indicative $1.33 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"490 m ($3.06 per l\/m)","offer_id":43379734839363,"sku":"MR-2425-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"2451 m ($1.33 per l\/m)","offer_id":43379734872131,"sku":"MR-2425-250","price":3260.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-2425.png?v=1781231953"},{"product_id":"3425-25-0-x-5-0mm-scotia","title":"Aluminium Scotia Moulding 25 × 5 mm — Die 3425","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3425).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.127 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 92 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 394 m (indicative $3.81 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1969 m (indicative $1.65 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"394 m ($3.81 per l\/m)","offer_id":43379734937667,"sku":"MR-3425-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"1969 m ($1.65 per l\/m)","offer_id":43379734970435,"sku":"MR-3425-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3425.png?v=1781231952"},{"product_id":"3568-label-holder","title":"Aluminium Label Holder Profile — Die 3568","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3568).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.368 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 219 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 136 m (indicative $11.04 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 679 m (indicative $4.78 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"136 m ($11.04 per l\/m)","offer_id":43379735199811,"sku":"MR-3568-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"679 m ($4.78 per l\/m)","offer_id":43379735232579,"sku":"MR-3568-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3568.png?v=1781231954"},{"product_id":"3809-ticket-section","title":"Aluminium Ticket Holder Profile — Die 3809","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3809).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.069 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 53 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 725 m (indicative $2.07 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3623 m (indicative $0.90 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"725 m ($2.07 per l\/m)","offer_id":43379735298115,"sku":"MR-3809-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"3623 m ($0.90 per l\/m)","offer_id":43379735330883,"sku":"MR-3809-250","price":3261.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3809.png?v=1781231954"},{"product_id":"4527-top-fix-punched","title":"Aluminium Top-Fix Punched Profile — Die 4527","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4527).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.081 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 55 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 617 m (indicative $2.43 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3086 m (indicative $1.05 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"617 m ($2.43 per l\/m)","offer_id":43379736182851,"sku":"MR-4527-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"3086 m ($1.05 per l\/m)","offer_id":43379736215619,"sku":"MR-4527-250","price":3240.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4527.png?v=1781231951"},{"product_id":"4602-rope-channel","title":"Aluminium Rope Channel Profile — Die 4602","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4602).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.295 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 103 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 169 m (indicative $8.85 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 847 m (indicative $3.83 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"169 m ($8.85 per l\/m)","offer_id":43379736248387,"sku":"MR-4602-50","price":1496.0,"currency_code":"NZD","in_stock":true},{"title":"847 m ($3.83 per l\/m)","offer_id":43379736281155,"sku":"MR-4602-250","price":3244.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4602.png?v=1781231951"},{"product_id":"4612-rope-channel","title":"Aluminium Rope Channel Profile — Die 4612","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4612).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.247 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 96.6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 202 m (indicative $7.41 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1012 m (indicative $3.21 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"202 m ($7.41 per l\/m)","offer_id":43379736510531,"sku":"MR-4612-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"1012 m ($3.21 per l\/m)","offer_id":43379736543299,"sku":"MR-4612-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4612.png?v=1781231951"},{"product_id":"4773-cs16-soaker","title":"Aluminium Soaker Flashing Profile — Die 4773","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4773).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.097 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 81 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 515 m (indicative $2.91 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2577 m (indicative $1.26 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"515 m ($2.91 per l\/m)","offer_id":43379736739907,"sku":"MR-4773-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"2577 m ($1.26 per l\/m)","offer_id":43379736772675,"sku":"MR-4773-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4773.png?v=1781231951"},{"product_id":"4834-cs-31-female","title":"Aluminium Connector Profile (Female) — Die 4834","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4834).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.483 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 225 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 104 m (indicative $14.49 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 518 m (indicative $6.28 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"104 m ($14.49 per l\/m)","offer_id":43379736838211,"sku":"MR-4834-50","price":1507.0,"currency_code":"NZD","in_stock":true},{"title":"518 m ($6.28 per l\/m)","offer_id":43379736870979,"sku":"MR-4834-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4834.png?v=1781231952"},{"product_id":"4835-cs-32-male","title":"Aluminium Connector Profile (Male) — Die 4835","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4835).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.392 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 128 m (indicative $11.76 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 638 m (indicative $5.10 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"128 m ($11.76 per l\/m)","offer_id":43379736936515,"sku":"MR-4835-50","price":1505.0,"currency_code":"NZD","in_stock":true},{"title":"638 m ($5.10 per l\/m)","offer_id":43379736969283,"sku":"MR-4835-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4835.png?v=1781231951"},{"product_id":"4995-cs-20-04-xhr-expansion-joint-cove","title":"Aluminium Expansion Joint Cove Profile — Die 4995","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4995).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.082 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 68 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 610 m (indicative $2.46 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3049 m (indicative $1.07 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"610 m ($2.46 per l\/m)","offer_id":43379738247235,"sku":"MR-4995-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"3049 m ($1.07 per l\/m)","offer_id":43379738280003,"sku":"MR-4995-250","price":3262.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4995.png?v=1781231951"},{"product_id":"5167-plt6-01-vertical-rail","title":"Aluminium Vertical Rail Profile — Die 5167","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5167).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.280 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 173 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 179 m (indicative $8.40 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 893 m (indicative $3.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"179 m ($8.40 per l\/m)","offer_id":43379738443843,"sku":"MR-5167-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"893 m ($3.64 per l\/m)","offer_id":43379738476611,"sku":"MR-5167-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5167.png?v=1781231973"},{"product_id":"5168-plt6-06-head","title":"Aluminium Head Profile — Die 5168","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5168).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.226 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 140 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 221 m (indicative $6.78 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1106 m (indicative $2.94 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"221 m ($6.78 per l\/m)","offer_id":43379738509379,"sku":"MR-5168-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"1106 m ($2.94 per l\/m)","offer_id":43379738542147,"sku":"MR-5168-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5168.png?v=1781231973"},{"product_id":"5169-plt6-07-sill","title":"Aluminium Sill Profile — Die 5169","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5169).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.217 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 109 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 230 m (indicative $6.51 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1152 m (indicative $2.82 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"230 m ($6.51 per l\/m)","offer_id":43379738607683,"sku":"MR-5169-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"1152 m ($2.82 per l\/m)","offer_id":43379738640451,"sku":"MR-5169-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5169.png?v=1781231973"},{"product_id":"5170-plt6-04-jamb-clip","title":"Aluminium Jamb Clip Profile — Die 5170","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5170).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.071 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 43 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 704 m (indicative $2.13 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3521 m (indicative $0.92 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"704 m ($2.13 per l\/m)","offer_id":43379738869827,"sku":"MR-5170-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"3521 m ($0.92 per l\/m)","offer_id":43379738902595,"sku":"MR-5170-250","price":3239.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5170.png?v=1781231973"},{"product_id":"5183-plu3-01-panel-mount","title":"Aluminium Panel Mount Profile — Die 5183","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5183).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.272 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 116 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 184 m (indicative $8.16 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 919 m (indicative $3.54 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"184 m ($8.16 per l\/m)","offer_id":43379739131971,"sku":"MR-5183-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"919 m ($3.54 per l\/m)","offer_id":43379739164739,"sku":"MR-5183-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5183.png?v=1781231973"},{"product_id":"5184-plu3-02-wall-mount","title":"Aluminium Wall Mount Profile — Die 5184","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5184).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.253 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 111 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 198 m (indicative $7.59 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 988 m (indicative $3.29 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"198 m ($7.59 per l\/m)","offer_id":43379739230275,"sku":"MR-5184-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"988 m ($3.29 per l\/m)","offer_id":43379739263043,"sku":"MR-5184-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5184.png?v=1781231974"},{"product_id":"5202-plt6-03-jamb","title":"Aluminium Jamb Profile — Die 5202","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5202).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.272 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 142 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 184 m (indicative $8.16 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 919 m (indicative $3.54 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"184 m ($8.16 per l\/m)","offer_id":43379739459651,"sku":"MR-5202-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"919 m ($3.54 per l\/m)","offer_id":43379739492419,"sku":"MR-5202-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5202.png?v=1781231974"},{"product_id":"5249-5-0mm-single-glaze-bead-standard","title":"Aluminium Single Glazing Bead 5 mm — Die 5249","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5249).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.163 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 107 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 307 m (indicative $4.89 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1534 m (indicative $2.12 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"307 m ($4.89 per l\/m)","offer_id":43379740246083,"sku":"MR-5249-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"1534 m ($2.12 per l\/m)","offer_id":43379740278851,"sku":"MR-5249-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5249.png?v=1781231975"},{"product_id":"5307-section","title":"Aluminium Profile — Die 5307","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5307).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 1.869 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 168 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 27 m (indicative $56.07 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 134 m (indicative $24.30 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"27 m ($56.07 per l\/m)","offer_id":43379740573763,"sku":"MR-5307-50","price":1514.0,"currency_code":"NZD","in_stock":true},{"title":"134 m ($24.30 per l\/m)","offer_id":43379740606531,"sku":"MR-5307-250","price":3256.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5307.png?v=1781231974"},{"product_id":"5430-e-10780-double-glazing-bead","title":"Aluminium Double Glazing Bead — Die 5430","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5430).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.181 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 122 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 276 m (indicative $5.43 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1381 m (indicative $2.35 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"276 m ($5.43 per l\/m)","offer_id":43379741065283,"sku":"MR-5430-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1381 m ($2.35 per l\/m)","offer_id":43379741098051,"sku":"MR-5430-250","price":3245.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5430.png?v=1781231975"},{"product_id":"5465-ultimate-glazing-bead","title":"Aluminium Glazing Bead — Die 5465","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5465).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.183 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 273 m (indicative $5.49 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1366 m (indicative $2.38 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"273 m ($5.49 per l\/m)","offer_id":43379741196355,"sku":"MR-5465-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1366 m ($2.38 per l\/m)","offer_id":43379741229123,"sku":"MR-5465-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5465.png?v=1781231975"},{"product_id":"5507-crate-label-holder","title":"Aluminium Crate Label Holder Profile — Die 5507","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5507).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.368 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 219 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 136 m (indicative $11.04 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 679 m (indicative $4.78 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"136 m ($11.04 per l\/m)","offer_id":43379741622339,"sku":"MR-5507-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"679 m ($4.78 per l\/m)","offer_id":43379741655107,"sku":"MR-5507-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5507.png?v=1781231976"},{"product_id":"5533-door-jamb","title":"Aluminium Door Jamb Profile — Die 5533","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5533).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.552 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 230 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 91 m (indicative $16.56 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 453 m (indicative $7.18 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"91 m ($16.56 per l\/m)","offer_id":43379741720643,"sku":"MR-5533-50","price":1507.0,"currency_code":"NZD","in_stock":true},{"title":"453 m ($7.18 per l\/m)","offer_id":43379741753411,"sku":"MR-5533-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5533.png?v=1781231974"},{"product_id":"5589-closet-rail","title":"Aluminium Closet Rail Profile — Die 5589","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5589).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.524 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 263 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 95 m (indicative $15.72 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 477 m (indicative $6.81 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"95 m ($15.72 per l\/m)","offer_id":43379742048323,"sku":"MR-5589-50","price":1493.0,"currency_code":"NZD","in_stock":true},{"title":"477 m ($6.81 per l\/m)","offer_id":43379742081091,"sku":"MR-5589-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5589.png?v=1781231975"},{"product_id":"5635-plu3-04-mk-2","title":"Aluminium Panel-System Profile — Die 5635","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5635).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.292 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 117 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 171 m (indicative $8.76 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 856 m (indicative $3.80 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"171 m ($8.76 per l\/m)","offer_id":43379742146627,"sku":"MR-5635-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"856 m ($3.80 per l\/m)","offer_id":43379742179395,"sku":"MR-5635-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5635.png?v=1781231975"},{"product_id":"5713-handle","title":"Aluminium Handle Profile — Die 5713","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5713).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.341 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 129 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 147 m (indicative $10.23 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 733 m (indicative $4.43 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"147 m ($10.23 per l\/m)","offer_id":43379742507075,"sku":"MR-5713-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"733 m ($4.43 per l\/m)","offer_id":43379742539843,"sku":"MR-5713-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5713.png?v=1781231974"},{"product_id":"6480-aec-heavy-ano-jig","title":"Aluminium Anodising Jig Profile — Die 6480","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6480).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 3.211 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 239 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 16 m (indicative $96.33 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 78 m (indicative $41.74 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"16 m ($96.33 per l\/m)","offer_id":43379745587267,"sku":"MR-6480-50","price":1541.0,"currency_code":"NZD","in_stock":true},{"title":"78 m ($41.74 per l\/m)","offer_id":43379745620035,"sku":"MR-6480-250","price":3256.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6480.png?v=1781231973"},{"product_id":"6502-70mm-louvre","title":"Aluminium Louvre Blade 70 mm — Die 6502","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6502).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.432 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 193 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 116 m (indicative $12.96 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 579 m (indicative $5.62 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"116 m ($12.96 per l\/m)","offer_id":43379745652803,"sku":"MR-6502-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"579 m ($5.62 per l\/m)","offer_id":43379745685571,"sku":"MR-6502-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6502.png?v=1781231976"},{"product_id":"6562-joinery-handle-top","title":"Aluminium Joinery Handle Profile (Top-Mount) — Die 6562","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6562).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.389 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 161 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 129 m (indicative $11.67 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 643 m (indicative $5.06 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"129 m ($11.67 per l\/m)","offer_id":43379746177091,"sku":"MR-6562-50","price":1505.0,"currency_code":"NZD","in_stock":true},{"title":"643 m ($5.06 per l\/m)","offer_id":43379746209859,"sku":"MR-6562-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6562.png?v=1781231975"},{"product_id":"6563-joinery-handle-bottom","title":"Aluminium Joinery Handle Profile (Bottom-Mount) — Die 6563","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6563).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.224 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 223 m (indicative $6.72 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1116 m (indicative $2.91 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"223 m ($6.72 per l\/m)","offer_id":43379746275395,"sku":"MR-6563-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1116 m ($2.91 per l\/m)","offer_id":43379746308163,"sku":"MR-6563-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6563.png?v=1781231975"},{"product_id":"6564-joinery-handle-double","title":"Aluminium Joinery Handle Profile (Double-Sided) — Die 6564","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6564).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.588 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 266 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 85 m (indicative $17.64 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 425 m (indicative $7.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"85 m ($17.64 per l\/m)","offer_id":43379746701379,"sku":"MR-6564-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"425 m ($7.64 per l\/m)","offer_id":43379746734147,"sku":"MR-6564-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"5610-25mm-infill","title":"Aluminium Infill Profile 25 mm — Die 5610","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5610).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Square\u003c\/li\u003e\n\u003cli\u003eWeight: 0.232 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 78 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 216 m (indicative $6.96 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1078 m (indicative $3.02 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"216 m ($6.96 per l\/m)","offer_id":43379747553347,"sku":"MR-5610-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"1078 m ($3.02 per l\/m)","offer_id":43379747586115,"sku":"MR-5610-250","price":3256.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5610.png?v=1781231973"},{"product_id":"5614-20mm-infill","title":"Aluminium Infill Profile 20 mm — Die 5614","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5614).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Square\u003c\/li\u003e\n\u003cli\u003eWeight: 0.199 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 69 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 251 m (indicative $5.97 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1256 m (indicative $2.59 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"251 m ($5.97 per l\/m)","offer_id":43379747881027,"sku":"MR-5614-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"1256 m ($2.59 per l\/m)","offer_id":43379747913795,"sku":"MR-5614-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5614.png?v=1781231973"},{"product_id":"2555-20mm-igu-spacer-bar-v062-see-d","title":"Aluminium IGU Spacer Bar 20 mm — Die 2555","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 2555).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Square \/ Rectangular\u003c\/li\u003e\n\u003cli\u003eWeight: 0.111 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 54 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 450 m (indicative $3.33 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2252 m (indicative $1.44 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"450 m ($3.33 per l\/m)","offer_id":43379748864067,"sku":"MR-2555-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"2252 m ($1.44 per l\/m)","offer_id":43379748896835,"sku":"MR-2555-250","price":3243.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-2555.png?v=1781231952"},{"product_id":"3907-camera-bar","title":"Aluminium Camera Bar Profile — Die 3907","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3907).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Square \/ Rectangular\u003c\/li\u003e\n\u003cli\u003eWeight: 0.161 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 58 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 311 m (indicative $4.83 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1553 m (indicative $2.09 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"311 m ($4.83 per l\/m)","offer_id":43379749552195,"sku":"MR-3907-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"1553 m ($2.09 per l\/m)","offer_id":43379749584963,"sku":"MR-3907-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3907.png?v=1781231953"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/collections\/die-5465.png?v=1792610487","url":"https:\/\/store.alexco.co.nz\/collections\/mill-run-specialty-profiles.oembed","provider":"Aluminium Extrusion Company","version":"1.0","type":"link"}