{"title":"Rod \u0026 Solid Bar","description":"\u003cp\u003eRound rod and solid bar available as a mill run from existing Alexco dies, sorted by size. Made to order at our Wellington plant — typical runs 150–500 kg.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/mill-run-profiles\"\u003e← All Mill Run categories\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"181-3-16-rod","title":"Aluminium Round Rod 4.75 mm (3\/16\") — Die 181","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 181).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.048 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 15 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1271\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 1042 m (indicative $1.68 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 5208 m (indicative $0.69 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"1042 m ($1.68 per l\/m)","offer_id":43378768871491,"sku":"MR-181-50","price":1751.0,"currency_code":"NZD","in_stock":true},{"title":"5208 m ($0.69 per l\/m)","offer_id":43378768904259,"sku":"MR-181-250","price":3594.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-181.png?v=1781231951"},{"product_id":"4489-hex","title":"Aluminium Hexagonal Bar — Die 4489","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4489).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Flat\u003c\/li\u003e\n\u003cli\u003eWeight: 0.127 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 25.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 394 m (indicative $3.81 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1969 m (indicative $1.65 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"394 m ($3.81 per l\/m)","offer_id":43379716358211,"sku":"MR-4489-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"1969 m ($1.65 per l\/m)","offer_id":43379716390979,"sku":"MR-4489-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4489.png?v=1781231951"},{"product_id":"2-1-4-rod","title":"Aluminium Round Rod 6.25 mm (1\/4\") — Die 2","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 2).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.085 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 20 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1270\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 588 m (indicative $2.55 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2941 m (indicative $1.10 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"588 m ($2.55 per l\/m)","offer_id":43379722027075,"sku":"MR-2-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"2941 m ($1.10 per l\/m)","offer_id":43379722059843,"sku":"MR-2-250","price":3235.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-2.png?v=1781231952"},{"product_id":"59-5-8-x-3-32-h-round","title":"Aluminium Half-Round 16 × 2.5 mm (5\/8\" × 3\/32\") — Die 59","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 59).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.074 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 33 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 676 m (indicative $2.22 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3378 m (indicative $0.96 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"676 m ($2.22 per l\/m)","offer_id":43379722158147,"sku":"MR-59-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"3378 m ($0.96 per l\/m)","offer_id":43379722190915,"sku":"MR-59-250","price":3243.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-59.png?v=1781231952"},{"product_id":"112-12-0mm-dia-rod","title":"Aluminium Round Rod 12 mm — Die 112","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 112).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.307 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 38 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 163 m (indicative $9.21 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 814 m (indicative $3.99 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"163 m ($9.21 per l\/m)","offer_id":43379722682435,"sku":"MR-112-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"814 m ($3.99 per l\/m)","offer_id":43379722715203,"sku":"MR-112-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-112.png?v=1781231951"},{"product_id":"207-6mm-rod","title":"Aluminium Round Rod 6 mm — Die 207","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 207).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.077 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 649 m (indicative $2.31 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3247 m (indicative $1.00 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"649 m ($2.31 per l\/m)","offer_id":43379722780739,"sku":"MR-207-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"3247 m ($1.00 per l\/m)","offer_id":43379722813507,"sku":"MR-207-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-207.png?v=1781231952"},{"product_id":"211-3-4-rod","title":"Aluminium Round Rod 19 mm (3\/4\") — Die 211","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 211).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.769 kg\/m\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1261\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 65 m (indicative $23.07 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 325 m (indicative $10.00 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"65 m ($23.07 per l\/m)","offer_id":43379723010115,"sku":"MR-211-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"325 m ($10.00 per l\/m)","offer_id":43379723042883,"sku":"MR-211-250","price":3250.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"220-5-84mm-rod","title":"Aluminium Round Rod 5.84 mm — Die 220","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 220).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.073 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 689 m (indicative $2.18 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 3444 m (indicative $0.94 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"689 m ($2.18 per l\/m)","offer_id":43379723108419,"sku":"MR-220-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"3444 m ($0.94 per l\/m)","offer_id":43379723141187,"sku":"MR-220-250","price":3237.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"246-1-8-rod","title":"Aluminium Round Rod 3.2 mm (1\/8\") — Die 246","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 246).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.022 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 2273 m (indicative $0.66 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 11364 m (indicative $0.29 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"2273 m ($0.66 per l\/m)","offer_id":43379723206723,"sku":"MR-246-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"11364 m ($0.29 per l\/m)","offer_id":43379723239491,"sku":"MR-246-250","price":3296.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-246.png?v=1781231952"},{"product_id":"247-7-0mm-rod","title":"Aluminium Round Rod 7 mm — Die 247","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 247).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.105 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 476 m (indicative $3.15 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2381 m (indicative $1.36 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"476 m ($3.15 per l\/m)","offer_id":43379723305027,"sku":"MR-247-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"2381 m ($1.36 per l\/m)","offer_id":43379723337795,"sku":"MR-247-250","price":3238.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"683-8mm-rod","title":"Aluminium Round Rod 8 mm — Die 683","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 683).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.134 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 25 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1269\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 373 m (indicative $4.02 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1866 m (indicative $1.74 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"373 m ($4.02 per l\/m)","offer_id":43379723698243,"sku":"MR-683-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1866 m ($1.74 per l\/m)","offer_id":43379723731011,"sku":"MR-683-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-683.png?v=1781231952"},{"product_id":"1010-10-9mm-rod","title":"Aluminium Round Rod 10.9 mm — Die 1010","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1010).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.252 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 198 m (indicative $7.56 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 992 m (indicative $3.28 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"198 m ($7.56 per l\/m)","offer_id":43379723796547,"sku":"MR-1010-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"992 m ($3.28 per l\/m)","offer_id":43379723829315,"sku":"MR-1010-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"1029-10-8mm-rod","title":"Aluminium Round Rod 10.8 mm — Die 1029","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1029).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.248 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 202 m (indicative $7.44 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1008 m (indicative $3.22 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"202 m ($7.44 per l\/m)","offer_id":43379723894851,"sku":"MR-1029-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"1008 m ($3.22 per l\/m)","offer_id":43379723927619,"sku":"MR-1029-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"1030-9-45mm-rod","title":"Aluminium Round Rod 9.45 mm — Die 1030","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1030).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.190 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 29.7 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1258\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 263 m (indicative $5.70 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1316 m (indicative $2.47 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"263 m ($5.70 per l\/m)","offer_id":43379723993155,"sku":"MR-1030-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1316 m ($2.47 per l\/m)","offer_id":43379724025923,"sku":"MR-1030-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"1038-12-65mm-rod","title":"Aluminium Round Rod 12.65 mm — Die 1038","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1038).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.340 kg\/m\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1259\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 147 m (indicative $10.20 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 735 m (indicative $4.42 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"147 m ($10.20 per l\/m)","offer_id":43379724091459,"sku":"MR-1038-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"735 m ($4.42 per l\/m)","offer_id":43379724124227,"sku":"MR-1038-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"3980-12-7mm-round-rod","title":"Aluminium Round Rod 12.7 mm — Die 3980","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3980).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.343 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 40 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1259\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 146 m (indicative $10.29 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 729 m (indicative $4.46 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"146 m ($10.29 per l\/m)","offer_id":43379724189763,"sku":"MR-3980-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"729 m ($4.46 per l\/m)","offer_id":43379724222531,"sku":"MR-3980-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3980.png?v=1781231951"},{"product_id":"6280-14-0mm-diameter-round-bar","title":"Aluminium Round Rod 14 mm — Die 6280","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6280).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Rod\u003c\/li\u003e\n\u003cli\u003eWeight: 0.417 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 44 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 120 m (indicative $12.51 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 600 m (indicative $5.42 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"120 m ($12.51 per l\/m)","offer_id":43379724288067,"sku":"MR-6280-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"600 m ($5.42 per l\/m)","offer_id":43379724320835,"sku":"MR-6280-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6280.png?v=1781231974"},{"product_id":"4106-octagon-38-1-a-f","title":"Aluminium Octagonal Bar 38.1 mm A\/F — Die 4106","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4106).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.333 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 132 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 150 m (indicative $9.99 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 751 m (indicative $4.33 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"150 m ($9.99 per l\/m)","offer_id":43379735691331,"sku":"MR-4106-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"751 m ($4.33 per l\/m)","offer_id":43379735724099,"sku":"MR-4106-250","price":3252.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4106.png?v=1781231952"},{"product_id":"3138-6-0mm-square-bar-tilt-rod","title":"Aluminium Square Bar 6 mm — Die 3138","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3138).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Square\u003c\/li\u003e\n\u003cli\u003eWeight: 0.096 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 23 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 521 m (indicative $2.88 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2604 m (indicative $1.25 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"521 m ($2.88 per l\/m)","offer_id":43379747291203,"sku":"MR-3138-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"2604 m ($1.25 per l\/m)","offer_id":43379747323971,"sku":"MR-3138-250","price":3255.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3138.png?v=1781231953"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/collections\/die-112_6d9d8dbb-6a58-481c-b170-b55bc0841be9.png?v=1792610468","url":"https:\/\/store.alexco.co.nz\/collections\/mill-run-rod-solid-bar.oembed","provider":"Aluminium Extrusion Company","version":"1.0","type":"link"}