{"title":"Channel \u0026 C-Section","description":"\u003cp\u003eChannel and C-section available as a mill run from existing Alexco dies, sorted by size. Made to order at our Wellington plant — typical runs 150–500 kg.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/mill-run-profiles\"\u003e← All Mill Run categories\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"1269-split-tube-small","title":"Aluminium Split Tube (Small) — Die 1269","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1269).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: C Section\u003c\/li\u003e\n\u003cli\u003eWeight: 0.106 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 61 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 471 m (indicative $3.19 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2354 m (indicative $1.38 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"471 m ($3.19 per l\/m)","offer_id":43379697123395,"sku":"MR-1269-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"2354 m ($1.38 per l\/m)","offer_id":43379697156163,"sku":"MR-1269-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-1269.png?v=1781231951"},{"product_id":"1656-c-channel","title":"Aluminium C-Section — Die 1656","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1656).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: C Section\u003c\/li\u003e\n\u003cli\u003eWeight: 0.183 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 273 m (indicative $5.49 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1366 m (indicative $2.38 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"273 m ($5.49 per l\/m)","offer_id":43379697221699,"sku":"MR-1656-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1366 m ($2.38 per l\/m)","offer_id":43379697254467,"sku":"MR-1656-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-1656.png?v=1781231952"},{"product_id":"6633-louvre-receiver-channel","title":"Aluminium Louvre Receiver Channel — Die 6633","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6633).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Cap\u003c\/li\u003e\n\u003cli\u003eWeight: 0.332 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 166 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 151 m (indicative $9.96 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 753 m (indicative $4.32 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"151 m ($9.96 per l\/m)","offer_id":43379698204739,"sku":"MR-6633-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"753 m ($4.32 per l\/m)","offer_id":43379698237507,"sku":"MR-6633-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6633.png?v=1781231975"},{"product_id":"92-1-x-1-x-1-16-channel","title":"Aluminium Channel 25.4 × 25.4 × 1.5 mm (1\" × 1\" × 1\/16\") — Die 92","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 92).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.310 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 161 m (indicative $9.30 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 806 m (indicative $4.03 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"161 m ($9.30 per l\/m)","offer_id":43379698303043,"sku":"MR-92-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"806 m ($4.03 per l\/m)","offer_id":43379698335811,"sku":"MR-92-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-92.png?v=1781231951"},{"product_id":"352-1-4-glass-channel","title":"Aluminium Glass Channel 6.25 mm (1\/4\") — Die 352","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 352).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.109 kg\/m\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 459 m (indicative $3.27 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2294 m (indicative $1.42 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"459 m ($3.27 per l\/m)","offer_id":43379698401347,"sku":"MR-352-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"2294 m ($1.42 per l\/m)","offer_id":43379698434115,"sku":"MR-352-250","price":3257.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-352.png?v=1781231951"},{"product_id":"633-7-8-x-7-8-x-1-8-channel","title":"Aluminium Channel 22.25 × 22.25 × 3.2 mm (7\/8\" × 7\/8\" × 1\/8\") — Die 633","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 633).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.519 kg\/m\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1138\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 96 m (indicative $15.57 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 482 m (indicative $6.75 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"96 m ($15.57 per l\/m)","offer_id":43379698499651,"sku":"MR-633-50","price":1495.0,"currency_code":"NZD","in_stock":true},{"title":"482 m ($6.75 per l\/m)","offer_id":43379698532419,"sku":"MR-633-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/drawing-to-follow.png?v=1781217456"},{"product_id":"3073-channel","title":"Aluminium Channel — Die 3073","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3073).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.168 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 84 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 298 m (indicative $5.04 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1488 m (indicative $2.18 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"298 m ($5.04 per l\/m)","offer_id":43379698597955,"sku":"MR-3073-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"1488 m ($2.18 per l\/m)","offer_id":43379698630723,"sku":"MR-3073-250","price":3244.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3073.png?v=1781231952"},{"product_id":"3534-14-2-x-14-0mm-channel","title":"Aluminium Channel 14.2 × 14 mm — Die 3534","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3534).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.180 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 77 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 278 m (indicative $5.40 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1389 m (indicative $2.34 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"278 m ($5.40 per l\/m)","offer_id":43379699155011,"sku":"MR-3534-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"1389 m ($2.34 per l\/m)","offer_id":43379699187779,"sku":"MR-3534-250","price":3250.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3534.png?v=1781231953"},{"product_id":"3868-co27892-channel","title":"Aluminium Channel — Die 3868","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3868).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.305 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 114 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 164 m (indicative $9.15 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 820 m (indicative $3.96 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"164 m ($9.15 per l\/m)","offer_id":43379699318851,"sku":"MR-3868-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"820 m ($3.96 per l\/m)","offer_id":43379699351619,"sku":"MR-3868-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3868.png?v=1781231953"},{"product_id":"3932-m1720-fore-end-plate","title":"Aluminium Fore End Plate Profile — Die 3932","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 3932).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.135 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 61 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 370 m (indicative $4.05 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1852 m (indicative $1.76 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"370 m ($4.05 per l\/m)","offer_id":43379699417155,"sku":"MR-3932-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"1852 m ($1.76 per l\/m)","offer_id":43379699449923,"sku":"MR-3932-250","price":3260.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-3932.png?v=1781231951"},{"product_id":"4466-cs20-015-xpf","title":"Aluminium Channel Profile — Die 4466","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4466).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.154 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 325 m (indicative $4.62 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1623 m (indicative $2.00 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"325 m ($4.62 per l\/m)","offer_id":43379699515459,"sku":"MR-4466-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"1623 m ($2.00 per l\/m)","offer_id":43379699548227,"sku":"MR-4466-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4466.png?v=1781231951"},{"product_id":"4935-cs-33","title":"Aluminium Channel Profile — Die 4935","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4935).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.265 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 175 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 189 m (indicative $7.95 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 943 m (indicative $3.45 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"189 m ($7.95 per l\/m)","offer_id":43379699613763,"sku":"MR-4935-50","price":1503.0,"currency_code":"NZD","in_stock":true},{"title":"943 m ($3.45 per l\/m)","offer_id":43379699646531,"sku":"MR-4935-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4935.png?v=1781231951"},{"product_id":"5291-25mm-head-box","title":"Aluminium Head Box Profile 25 mm — Die 5291","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5291).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.216 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 162 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 231 m (indicative $6.48 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1157 m (indicative $2.81 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"231 m ($6.48 per l\/m)","offer_id":43379699679299,"sku":"MR-5291-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"1157 m ($2.81 per l\/m)","offer_id":43379699712067,"sku":"MR-5291-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5291.png?v=1781231975"},{"product_id":"5402-50mm-coolroom-channel","title":"Aluminium Coolroom Channel 50 mm — Die 5402","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5402).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.325 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 203 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 154 m (indicative $9.75 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 769 m (indicative $4.23 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"154 m ($9.75 per l\/m)","offer_id":43379699810371,"sku":"MR-5402-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"769 m ($4.23 per l\/m)","offer_id":43379699843139,"sku":"MR-5402-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5402.png?v=1781231974"},{"product_id":"5608-25-x-25-x-3mm-channel","title":"Aluminium Channel 25 × 25 × 3 mm — Die 5608","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5608).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.561 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 143 mm\u003c\/li\u003e\n\u003cli\u003eEquivalent to: UA1140\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 89 m (indicative $16.83 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 446 m (indicative $7.29 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"89 m ($16.83 per l\/m)","offer_id":43379699908675,"sku":"MR-5608-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"446 m ($7.29 per l\/m)","offer_id":43379699941443,"sku":"MR-5608-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5608.png?v=1781231973"},{"product_id":"6169-19x20x2-0mm-channel","title":"Aluminium Channel 19 × 20 × 2 mm — Die 6169","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6169).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.298 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 113 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 168 m (indicative $8.94 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 839 m (indicative $3.87 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"168 m ($8.94 per l\/m)","offer_id":43379700006979,"sku":"MR-6169-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"839 m ($3.87 per l\/m)","offer_id":43379700039747,"sku":"MR-6169-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6169.png?v=1781231974"},{"product_id":"6642-50mm-coolroom-channel","title":"Aluminium Coolroom Channel 50 mm — Die 6642","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6642).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Channel\u003c\/li\u003e\n\u003cli\u003eWeight: 0.325 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 203 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 154 m (indicative $9.75 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 769 m (indicative $4.23 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"154 m ($9.75 per l\/m)","offer_id":43379700269123,"sku":"MR-6642-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"769 m ($4.23 per l\/m)","offer_id":43379700301891,"sku":"MR-6642-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6642.png?v=1781231974"},{"product_id":"4405-44-x-20mm-channel","title":"Aluminium Channel 44 × 20 mm — Die 4405","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4405).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.646 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 209.42 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 77 m (indicative $19.38 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 387 m (indicative $8.40 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"77 m ($19.38 per l\/m)","offer_id":43379735953475,"sku":"MR-4405-50","price":1492.0,"currency_code":"NZD","in_stock":true},{"title":"387 m ($8.40 per l\/m)","offer_id":43379735986243,"sku":"MR-4405-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4405.png?v=1781231951"},{"product_id":"5502-acqutex-channel","title":"Aluminium Channel Profile — Die 5502","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5502).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.209 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 123 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 239 m (indicative $6.27 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1196 m (indicative $2.72 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"239 m ($6.27 per l\/m)","offer_id":43379741294659,"sku":"MR-5502-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1196 m ($2.72 per l\/m)","offer_id":43379741327427,"sku":"MR-5502-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5502.png?v=1781231975"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/collections\/die-1656.png?v=1792610470","url":"https:\/\/store.alexco.co.nz\/collections\/mill-run-channel-c-section.oembed","provider":"Aluminium Extrusion Company","version":"1.0","type":"link"}