{"title":"Blind Rails \u0026 Tubes","description":"\u003cp\u003eBlind bottom rails, top tubes, headrails and roller tubes available as a mill run from existing Alexco dies. Made to order at our Wellington plant — typical runs 150–500 kg.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/mill-run-profiles\"\u003e← All Mill Run categories\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"1700-bottom-rail","title":"Aluminium Bottom Rail Profile — Die 1700","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 1700).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: C Section\u003c\/li\u003e\n\u003cli\u003eWeight: 0.118 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 84 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 424 m (indicative $3.54 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 2119 m (indicative $1.53 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"424 m ($3.54 per l\/m)","offer_id":43379697320003,"sku":"MR-1700-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"2119 m ($1.53 per l\/m)","offer_id":43379697352771,"sku":"MR-1700-250","price":3242.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-1700.png?v=1781231954"},{"product_id":"4461-oval-bottom-rail","title":"Aluminium Oval Bottom Rail Profile — Die 4461","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4461).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.291 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 126.8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 172 m (indicative $8.73 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 859 m (indicative $3.78 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"172 m ($8.73 per l\/m)","offer_id":43379736051779,"sku":"MR-4461-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"859 m ($3.78 per l\/m)","offer_id":43379736084547,"sku":"MR-4461-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4461.png?v=1781231954"},{"product_id":"4628-40mm-dia-roller-tube","title":"Aluminium Roller Tube 40 mm — Die 4628","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4628).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.434 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 152 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 115 m (indicative $13.02 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 576 m (indicative $5.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"115 m ($13.02 per l\/m)","offer_id":43379736641603,"sku":"MR-4628-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"576 m ($5.64 per l\/m)","offer_id":43379736674371,"sku":"MR-4628-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4628.png?v=1781231954"},{"product_id":"4962-drape-headrail","title":"Aluminium Drape Headrail Profile — Die 4962","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 4962).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.413 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 251 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 121 m (indicative $12.39 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 605 m (indicative $5.37 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"121 m ($12.39 per l\/m)","offer_id":43379737428035,"sku":"MR-4962-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"605 m ($5.37 per l\/m)","offer_id":43379737460803,"sku":"MR-4962-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-4962.png?v=1781231952"},{"product_id":"5082-dual-bottom-rail-mk2","title":"Aluminium Dual Bottom Rail Profile — Die 5082","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5082).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.245 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 148 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 204 m (indicative $7.35 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1020 m (indicative $3.19 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"204 m ($7.35 per l\/m)","offer_id":43379738345539,"sku":"MR-5082-50","price":1499.0,"currency_code":"NZD","in_stock":true},{"title":"1020 m ($3.19 per l\/m)","offer_id":43379738378307,"sku":"MR-5082-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5082.png?v=1781231973"},{"product_id":"5232-std-oval-bottom-rail-v2","title":"Aluminium Oval Bottom Rail Profile (Standard) — Die 5232","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5232).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.241 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 142 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 207 m (indicative $7.23 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1037 m (indicative $3.13 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"207 m ($7.23 per l\/m)","offer_id":43379739590723,"sku":"MR-5232-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"1037 m ($3.13 per l\/m)","offer_id":43379739623491,"sku":"MR-5232-250","price":3246.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5232.png?v=1781231975"},{"product_id":"5248-flat-bottom-rail","title":"Aluminium Flat Bottom Rail Profile — Die 5248","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5248).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.217 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 123 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 230 m (indicative $6.51 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 1152 m (indicative $2.82 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"230 m ($6.51 per l\/m)","offer_id":43379739721795,"sku":"MR-5248-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"1152 m ($2.82 per l\/m)","offer_id":43379739754563,"sku":"MR-5248-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5248.png?v=1781231975"},{"product_id":"5290-oval-bottom-rail","title":"Aluminium Oval Bottom Rail Profile — Die 5290","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5290).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.291 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 126.8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 172 m (indicative $8.73 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 859 m (indicative $3.78 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"172 m ($8.73 per l\/m)","offer_id":43379740442691,"sku":"MR-5290-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"859 m ($3.78 per l\/m)","offer_id":43379740475459,"sku":"MR-5290-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5290.png?v=1781231975"},{"product_id":"5344-26mm-flat-bottom-rail","title":"Aluminium Flat Bottom Rail Profile 26 mm — Die 5344","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5344).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.280 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 148 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 179 m (indicative $8.40 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 893 m (indicative $3.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"179 m ($8.40 per l\/m)","offer_id":43379740672067,"sku":"MR-5344-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"893 m ($3.64 per l\/m)","offer_id":43379740704835,"sku":"MR-5344-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5344.png?v=1781231976"},{"product_id":"5345-heavy-oval-bottom-rail","title":"Aluminium Oval Bottom Rail Profile (Heavy Duty) — Die 5345","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5345).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.280 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 137 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 179 m (indicative $8.40 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 893 m (indicative $3.64 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"179 m ($8.40 per l\/m)","offer_id":43379740803139,"sku":"MR-5345-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"893 m ($3.64 per l\/m)","offer_id":43379740835907,"sku":"MR-5345-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5345.png?v=1781231975"},{"product_id":"5674-elipse-bottom-rail","title":"Aluminium Elliptical Bottom Rail Profile — Die 5674","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5674).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.393 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 177 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 127 m (indicative $11.79 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 636 m (indicative $5.11 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"127 m ($11.79 per l\/m)","offer_id":43379742376003,"sku":"MR-5674-50","price":1497.0,"currency_code":"NZD","in_stock":true},{"title":"636 m ($5.11 per l\/m)","offer_id":43379742408771,"sku":"MR-5674-250","price":3250.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5674.png?v=1781231976"},{"product_id":"5980-45mm-top-tube","title":"Aluminium Top Tube 45 mm — Die 5980","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 5980).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.568 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 176 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 88 m (indicative $17.04 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 440 m (indicative $7.38 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"88 m ($17.04 per l\/m)","offer_id":43379742638147,"sku":"MR-5980-50","price":1500.0,"currency_code":"NZD","in_stock":true},{"title":"440 m ($7.38 per l\/m)","offer_id":43379742670915,"sku":"MR-5980-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-5980.png?v=1781231975"},{"product_id":"6030-38mm-top-tube","title":"Aluminium Top Tube 38 mm — Die 6030","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6030).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.419 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 122 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 119 m (indicative $12.57 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 597 m (indicative $5.45 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"119 m ($12.57 per l\/m)","offer_id":43379742703683,"sku":"MR-6030-50","price":1496.0,"currency_code":"NZD","in_stock":true},{"title":"597 m ($5.45 per l\/m)","offer_id":43379742736451,"sku":"MR-6030-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6030.png?v=1781231976"},{"product_id":"6031-50mm-top-tube","title":"Aluminium Top Tube 50 mm — Die 6031","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6031).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.727 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 161 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 69 m (indicative $21.81 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 344 m (indicative $9.45 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"69 m ($21.81 per l\/m)","offer_id":43379742801987,"sku":"MR-6031-50","price":1505.0,"currency_code":"NZD","in_stock":true},{"title":"344 m ($9.45 per l\/m)","offer_id":43379742834755,"sku":"MR-6031-250","price":3251.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6031.png?v=1781231976"},{"product_id":"6064-44-0mm-top-tube","title":"Aluminium Top Tube 44 mm — Die 6064","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6064).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.575 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 145 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 87 m (indicative $17.25 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 435 m (indicative $7.47 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"87 m ($17.25 per l\/m)","offer_id":43379742867523,"sku":"MR-6064-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"435 m ($7.47 per l\/m)","offer_id":43379742900291,"sku":"MR-6064-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6064.png?v=1781231975"},{"product_id":"6116-round-bottom-rail-screw-boss","title":"Aluminium Round Bottom Rail (Screw Boss) — Die 6116","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6116).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.262 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 156 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 191 m (indicative $7.86 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 954 m (indicative $3.41 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"191 m ($7.86 per l\/m)","offer_id":43379743391811,"sku":"MR-6116-50","price":1501.0,"currency_code":"NZD","in_stock":true},{"title":"954 m ($3.41 per l\/m)","offer_id":43379743424579,"sku":"MR-6116-250","price":3253.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6116.png?v=1781231975"},{"product_id":"6172-44-0mm-top-tube","title":"Aluminium Top Tube 44 mm — Die 6172","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6172).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.555 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 176 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 90 m (indicative $16.65 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 450 m (indicative $7.22 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"90 m ($16.65 per l\/m)","offer_id":43379743522883,"sku":"MR-6172-50","price":1498.0,"currency_code":"NZD","in_stock":true},{"title":"450 m ($7.22 per l\/m)","offer_id":43379743555651,"sku":"MR-6172-250","price":3249.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6172.png?v=1781231975"},{"product_id":"6200-50mm-heavy-duty-top-tube","title":"Aluminium Top Tube 50 mm (Heavy Duty) — Die 6200","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6200).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.994 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 165 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 50 m (indicative $29.82 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 252 m (indicative $12.92 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"50 m ($29.82 per l\/m)","offer_id":43379743588419,"sku":"MR-6200-50","price":1491.0,"currency_code":"NZD","in_stock":true},{"title":"252 m ($12.92 per l\/m)","offer_id":43379743621187,"sku":"MR-6200-250","price":3256.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6200.png?v=1781231975"},{"product_id":"6213-45mm-hd-top-tube","title":"Aluminium Top Tube 45 mm (Heavy Duty) — Die 6213","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6213).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.865 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 146 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 58 m (indicative $25.95 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 289 m (indicative $11.24 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"58 m ($25.95 per l\/m)","offer_id":43379743653955,"sku":"MR-6213-50","price":1505.0,"currency_code":"NZD","in_stock":true},{"title":"289 m ($11.24 per l\/m)","offer_id":43379743686723,"sku":"MR-6213-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6213.png?v=1781231976"},{"product_id":"6214-bottom-rail","title":"Aluminium Bottom Rail Profile — Die 6214","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6214).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.302 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 109 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 166 m (indicative $9.06 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 828 m (indicative $3.93 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"166 m ($9.06 per l\/m)","offer_id":43379743752259,"sku":"MR-6214-50","price":1504.0,"currency_code":"NZD","in_stock":true},{"title":"828 m ($3.93 per l\/m)","offer_id":43379743785027,"sku":"MR-6214-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6214.png?v=1781231975"},{"product_id":"6256-radius-bottom-rail","title":"Aluminium Radius Bottom Rail Profile — Die 6256","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6256).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.291 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 181 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 172 m (indicative $8.73 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 859 m (indicative $3.78 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"172 m ($8.73 per l\/m)","offer_id":43379744014403,"sku":"MR-6256-50","price":1502.0,"currency_code":"NZD","in_stock":true},{"title":"859 m ($3.78 per l\/m)","offer_id":43379744047171,"sku":"MR-6256-250","price":3247.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6256.png?v=1781231975"},{"product_id":"6356-45mm-top-tube","title":"Aluminium Top Tube 45 mm — Die 6356","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6356).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.534 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 144 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 94 m (indicative $16.02 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 468 m (indicative $6.94 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"94 m ($16.02 per l\/m)","offer_id":43379745488963,"sku":"MR-6356-50","price":1506.0,"currency_code":"NZD","in_stock":true},{"title":"468 m ($6.94 per l\/m)","offer_id":43379745521731,"sku":"MR-6356-250","price":3248.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6356.png?v=1781231975"},{"product_id":"6522-45mm-3-keyway-top-tube","title":"Aluminium Top Tube 45 mm (3-Keyway) — Die 6522","description":"\u003cp\u003eRun-to-order aluminium extrusion profile (die 6522).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCategory: Specialty Profiles\u003c\/li\u003e\n\u003cli\u003eWeight: 0.586 kg\/m\u003c\/li\u003e\n\u003cli\u003ePerimeter: 178 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable as a mill run:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 kg run\u003c\/strong\u003e – approx 85 m (indicative $17.58 \/m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kg run\u003c\/strong\u003e – approx 427 m (indicative $7.62 \/m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMill Run Profiles\u003c\/h4\u003e\u003cp\u003eProduced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill-run quantity applies to make production economic.\u003c\/p\u003e\u003cp\u003eTypical production runs are 150 to 500 kg, with larger runs being the most cost effective. Smaller runs may be possible, down to around 20 kg, but will usually carry a higher cost premium.\u003c\/p\u003e\u003cp\u003eBecause aluminium extrusion is a production process, exact order quantities cannot always be guaranteed. For mill runs, our standard shipping tolerance is plus or minus 10% of the ordered quantity.\u003c\/p\u003e\u003cp\u003eMill finish profiles are supplied raw, straight from the extrusion process. Minor handling marks, extrusion lines, smudges or surface variation may be visible and are considered normal for mill finish aluminium. This finish is generally best suited to functional or non-visual applications, or where the profile will be further processed, anodised, powder coated or fabricated.\u003c\/p\u003e\u003cp\u003eWith anodising and powder coating plants on site, we can also finish profiles to your requirements.\u003c\/p\u003e\u003cp\u003ePlease contact us before ordering if your project has critical cosmetic, tolerance, alloy, temper, length or finish requirements.\u003c\/p\u003e","brand":"ALEXCO","offers":[{"title":"85 m ($17.58 per l\/m)","offer_id":43379745849411,"sku":"MR-6522-50","price":1494.0,"currency_code":"NZD","in_stock":true},{"title":"427 m ($7.62 per l\/m)","offer_id":43379745882179,"sku":"MR-6522-250","price":3254.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/files\/die-6522.png?v=1781231975"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1853\/6573\/collections\/die-1700.png?v=1792610481","url":"https:\/\/store.alexco.co.nz\/collections\/mill-run-blind-rails-tubes.oembed","provider":"Aluminium Extrusion Company","version":"1.0","type":"link"}